Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

NAT Issues with PAT

Hi All

I have a lab setup to try and resolve an issue on a production network as below.

IPT-DIAL rev1 0.jpg

The internal switches are each site are configured with the Cisco HTTP server and these are accessible from within each site and from the remote site via a site-to-site vpn.  I have configured NAT overload for external connectivity and static nat for the web servers at each site using both 80 and 443.  The Cisco switches respond with authentication but the web pages are not displayed.

Is there something that I missing here or a know issue?

Thanks

1 REPLY

Re: NAT Issues with PAT

If you reaching through the VPN, this should be transparent to this switch and should work.

Can you telnet on the 80 and 443 ports to the remote webserver?

Please post your config.

Regards

Farrukh

533
Views
0
Helpful
1
Replies
CreatePlease to create content