Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

NAT Problem with 1720 router

Hi,

I am receiving this error when attempting to connect to my 1720 router using

version 3.5.1 on the Cisco VPN client

4 22:25:52.330 06/13/02 Sev=Warning/2 IPSEC/0x6370001E

Unexpected TCP control packet received from 64.69.121.18, src port 2200, dst port 2804, flags 14h

I'm not sure what Inside local IP address I should use in the

ip nat inside source static tcp command. Right now all of may Inside local IP address are pointing to an AS400.

Thanks

1 REPLY

Re: NAT Problem with 1720 router

Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center (http://www.cisco.com/tac) or speak with a TAC engineer. You can open a TAC case online at http://www.cisco.com/tac/caseopen

If anyone else in the forum has some advice, please reply to this thread.

Thank you for posting.

70
Views
0
Helpful
1
Replies