Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

NAT problem

Hi

I need to know if there is any way to do a translation based on a condition. For example, if the destination is a specific network then the translated address should be a specific address, but if the destination is a different network then the translated address is a different address.

I hope somebody can help me with this, because i need to implement it for a VPN.

Regards!

EF

3 REPLIES
Silver

Re: NAT problem

what device are you using?

New Member

Re: NAT problem

I´m using a 1700 router.

New Member

Re: NAT problem

Hi EF

I think this document will help you , you can find a very detailed example using ACLs or Route Maps.

http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080093fca.shtml

FEC

95
Views
0
Helpful
3
Replies