Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

nat question

I would like to know th command that permit to make nat with the pix outside interface.

thanks a lot

2 REPLIES

Re: nat question

Not 100% sure what you want but here is how to use NAT using the PIX outside interface IP:

ip address outside x.x.x.x

nat (inside) 1 0 0

global (outside) 1 interface

or

if you want to use NAT on the outside interface (to the inside):

http://www.cisco.com/warp/public/707/28.html#outnat

Hope it helps.

Steve

New Member

Re: nat question

Use this command: global (outside) 1 interface

It may come back with an error but have a look at your config and it will be there, slight bug...... but works well.

Thanks

RG

99
Views
0
Helpful
2
Replies