Re: natting on the pix firewall which is having two interfaces 5
The PIX will do the NATing for you; all youll need to make sure are as follows:
ip address outside xxx.210.233.69 255.255.255.248
ip address inside 10.1.105.1 255.255.255.0
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
route outside 0.0.0.0 0.0.0.0 xxx.210.223.66
The above setup will NAT all your internal hosts to one public IP (i.e. xxx.210.233.69). If you have more than one public IP available to you then you can change the above configuration but to get everything up and running the above will be just fine.
If you have internal mail server and require smtp access with one public IP then the following will suffice:
access-list mail_in permit tcp any host xxx.210.233.69 eq smtp
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...