Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Need to allow passage of the following two ip addresses

Hello,

I need to allow the following the two ip address to pass from the outside world thru our PIX515e firewall.

I keep getting an error on ip and subnet mask when I try to enter these.

Does anyone know the correct syntax?

The ip address that I need to allow any access for are;

207.236.99.201

192.206.158.10

Any help or advise or suggestions is greatly welcome!

TIA,

Gary

  • Other Security Subjects
1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: Need to allow passage of the following two ip addresses

access-list (name) permit ip 207.236.99.201 255.255.255.255 any

access-list (name) permit ip 192.206.158.10 255.255.255.255 any

substitue (name) with what you want to call the access-list.

This will allow unrestricted access from those IPs to all internal destinations. If you want to restrcit to certain hosts substitue the any with the IP address and subnet mask.

Then apply the access-list to your outside interface:

access-group (name) in interface outside

hth & please rate.

2 REPLIES
New Member

Re: Need to allow passage of the following two ip addresses

access-list (name) permit ip 207.236.99.201 255.255.255.255 any

access-list (name) permit ip 192.206.158.10 255.255.255.255 any

substitue (name) with what you want to call the access-list.

This will allow unrestricted access from those IPs to all internal destinations. If you want to restrcit to certain hosts substitue the any with the IP address and subnet mask.

Then apply the access-list to your outside interface:

access-group (name) in interface outside

hth & please rate.

New Member

Re: Need to allow passage of the following two ip addresses

THANK YOU

103
Views
5
Helpful
2
Replies
This widget could not be displayed.