cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
218
Views
0
Helpful
1
Replies

Need to "nat" an "outside Nat"

dmooreabc
Level 1
Level 1

Inside interface 10.11.112.254

Outside interface 65.xx.211.254

I have a outside Nat setup to allow rdp to an outside NAT of 65.xx.211.51 to 10.0.21.184

Need to translate the incoming packet to an 10.11.112.x ip.

used this as a blue print

http://cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a0080094aad.shtml#topic9

Device 209.165.202.129 to NAT to 10.100.1.3 when coming in

static (outside,inside) 10.11.112.51 65.xx.211.51 netmask 255.255.255.255 0 0

The above static should translate incoming traffic to a 10.11.112.51 IP on the inside interface.

traffic after it hits my outside NAT of .211.51 should be NAtted to 10.11.112.51 and head out the INSIDE interface to my 10.0.21.184 server.. correct?

I am not getting any connects a "sho conn" does show connections.

How can a verify that my 10.11.112.51 "nat" is working?

1 Reply 1

nkhawaja
Cisco Employee
Cisco Employee

Hi,

how about show xlat global 10.11.112.51, what does it say?

Also any log messages you can collect?

Thanks

Nadeem

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: