This is just connecting the 3002 at the moment to the 3030 right, not yet with IP phones behind. Common issue on this is that you probably doing RRI for the network behind the 3002, and your internal router on the 3030 actually has this route as well on its table which it is actually exchanging with the 3030 via some IGP. Or these is a route to the 3002's private via another way. Maybe be best taken care of as a TAC case for online troubleshooting.
Yes, just connecting them at the moment. We DID take the route out of the 3030 internal route tables. There is an open TAC case, but we are also trying this avenue in an attempt at expediency. Appears the 2nd message is attempting to validate the Network extension Network with the "framed ip address" in the 2nd message. The framed IP address looks like a subnet mask instead of a net.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...