I just recently got my asa 5510 up and running and tried to add a vpn connection (remote, not site to site). After I finish and try using the cisco client to connect i get the following erros in the logs on the pc, in attachment.
I get the following on the asa.
Group = DefaultRAGroup, IP = <my conn ip>, Removing peer fro peer table failed, no match!
Group = DefaultRAGroup, IP = <my conn ip>,Error: Unable to remove PeerTblEntry
I have done my own searches and all seem to point to the password being wrong. I have checked and rechecked, password is not wrong.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...