Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

New VPN configuration routing issues

I am new to vpn configuration and have set up a small vpn test network. I have a small "corporate" netork that my PC's can log into with no problems and then I have an internal protected network that I vpn into to access sensitive data. My VPN connects without a problem but I cannot route/connect to anything on the backside of the VPN router. I have used the sample configs provided in the Cisco documents relating to VPN Client to Cisco Router connections. I am using VPN client 4.7, aaa local authentication, and pre-shared keys. My client will grab an address from the VPN router no problem. I have attachted a diagram of my network and my router configs.


Re: New VPN configuration routing issues

just a quick comment.

the vpn client pool should not be overlapped with the private net or any net connected.


Re: New VPN configuration routing issues

Can you change the default route to the public side instead of pvt side. You can add Specfic routes to the Pvt segment if needed

ip route

New Member

Re: New VPN configuration routing issues

I rebuilt the network using the space for my network and using space for the VPN pools and it works like a charm.

Thanks all


Re: New VPN configuration routing issues

it's good to learn that your issue has been resolved.

according to cisco:

Why should I rate posts?

If you see a post that you think deserves recognition, please take a moment to rate it.

You'll be helping yourself and others to quickly identify useful content -- as determined by members. And you'll be ensuring that people who generously share their expertise are properly acknowledged. As posts are rated, the value of those ratings are accumulated as "points" and summarized on the Member Profile page and on each member's Preferences page.

CreatePlease login to create content