Hi Jon, thanks for your reponse. How can I test this works before deploying it. I put a router on the inside and can ping the inside asa address. My laptop on the outside and can ping the outside asa address. They cannot see through the asa though ?
Jon, I cannot seem to get this thing working. I am _so_ not the firewall person, this is my first:-) all I need to do is get this thing performing the NAT and so I can telnet to the outside address to manage it after it's installed at site - then the firewall peeps will take care of the rest :-) what am I doing wrong here ? Thanks again.
ASA Version 7.2(2)
enable password 8il5M/7PS/HH/mgc encrypted
ip address 192.168.5.234 255.255.255.0
ip address 10.96.112.15 255.255.255.0
switchport access vlan 2
passwd xxxxxxxxxxxx encrypted
ftp mode passive
access-list acl_outside extended permit icmp any any
access-list acl_outside extended permit ip any any
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...