It's apparent the NM-NAC and NM-WLC can be deployed in the same ISR, at the same time, to support the use of NAC in wired and wireless scenarios.
According to the FAQs, this type of deployment MUST use PBR to direct the traffic to the untrusted interface of the NM-NAC. Is this true?
Or is it also possible to use bridging, so that wired and wireless users are Layer-2 adjacent to the NM-NAC untrusted interface, and allow the NM-NAC in Real-IP mode, to route the data out of it's trusted interface, into the ISR, which can then route the traffic onwards as necessary?
BenefitsDocumentationPrerequisiteImage Download LinksLimitationsSupported PlatformsLicense RequirementsTopologyStep-By-Step ConfigurationConfigure Virtual ServiceActivate the virtual service and configure guest IPsConfiguring UTD (Service Plane)Configurin...
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...