No Inside Access When VPN'd Into PIX from Behind Linksys Router
Hello, everyone. I have a PIX VPN/firewall that works great for providing VPN access from behind other NAT'd firewalls (Apple AirPort, Cisco PIX), but when I try to VPN from behind a Linksys WRT54G (firmware 22.214.171.124), I can authenticate the IPSec connection, but can't see any clients on the remote network. I have VPN passthrough enabled on the Linksys, and wouldn't think it would be something in my PIX config, but thought I'd post it here and see what you all thought.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...