No Internet Access - until uncheck auto detect in IE
When a user connects to our PIX 506E they are able to access the internal network. but cannot access the internet. they appear to be going through our internal ISA server. I have split tunnel turned on. On the client I right click icon in task bar and select stats - route details. And see my internal networks and SM's.
When I open IE and UN-check automatically detect settings on the LAN settigns, internet access works.
Re: No Internet Access - until uncheck auto detect in IE
You can either use split tunnel (tunnel specified) or local lan at the same time (exclude specified with source set as 0.0.0.0 in ACL). They are mutually exclusive.
The reason why it might not be working when auto-detect is enabled; you might have WPAD configured on your EZVPN Server network and it would be taking the internet traffic from the client machine through your Proxy located behind the EZVPN Server, instead of going directly from VPN Client >> Internet.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...