No NAT DMZ web server when accessed by inside users
How can I build an exception for allowing users on the inside to access a web server on port 80 in the DMZ? They cannot do this now because, in my opinion, the server is going through a NAT to the public address, so how can I set it up where any request from the inside on port 80 to this server will not translate the server IP to a public IP (via NAT)?
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...