Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

No Packets Decrypted on VPN 3.5.2 Client on W2k

I am using VPN Client 3.5.2 on Windows 2000 to a 2600 with a crypto card. The tunnel comes up properly, and traffic is encrypted when destined to the remote network, but no traffic is decrypted on the client side. On the router the traffic is decrypted and then the return traffic is encrypted and sent to the software client., but again, no packets are decrypted. Any ideas what might be causing this. The VPN client software works fine on Windows 98. Thanks in Advance.

Cisco Employee

Re: No Packets Decrypted on VPN 3.5.2 Client on W2k

Make sure that the Client machine is not trying to Route the packets out another Interface (like a NIC card or something) make sure you do a DHCP release on the NIC adapters and also see the "route print" on the PC to see where the packets are going.

Hope this helps,

Thanks and Regards,

Aamir Waheed,

Cisco Systems, Inc.



CreatePlease login to create content