Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

no-xauth, no-config-mode

What is the meaning of [no-xauth, no-config-mode]?

Disable VPN Software connection if run [no-xauth, no-config-mode]?

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: no-xauth, no-config-mode

Hi,

no-xauth is used the extended authentication, that is to have the user prompted for a user name and password before connecting

no-config-mode is used to disable pushing data to the user connecting through the VPN client like the ip address, the DNS server, WINS server ....

both of the above are mandatory to exist when connecting using a software VPN client.

I hope that the above answers your questions.

Kindest regards,

Shadi`

3 REPLIES
New Member

Re: no-xauth, no-config-mode

Hi,

no-xauth is used the extended authentication, that is to have the user prompted for a user name and password before connecting

no-config-mode is used to disable pushing data to the user connecting through the VPN client like the ip address, the DNS server, WINS server ....

both of the above are mandatory to exist when connecting using a software VPN client.

I hope that the above answers your questions.

Kindest regards,

Shadi`

New Member

Re: no-xauth, no-config-mode

If I would like make connection through VPN client, how I can do it?

New Member

Re: no-xauth, no-config-mode

Hi,

By default, Xauth and config mode are enabled for VPN traffic, which means that you don't have to enable it.

usually disabling this traffic is done for site to site VPN tunnels.

following is a configuration example for configuring PIX and VPN client, I hope it would be helpful :)

http://www.cisco.com/en/US/partner/products/sw/secursw/ps2308/products_configuration_example09186a00801e71c0.shtml

K.Regards,

Shadi`

1224
Views
0
Helpful
3
Replies