Not able to connect to internet after Tunnel is establishing for Remote Access VPN client. Lan is accessible though?
I am using cisco 1811 router. I have configured Remote access VPN from Site to client (Using Shrewsoft VPN Client ) and Site to Site VPN on same physical interface. Both VPN are working but the remote access clients can only access the lan but no internet after connection. Is there something to change in my ACLs to set up split tunnel for those clients? Looking for split tunnel please!
I am also posting my router config:
Current configuration : 3737 bytes ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname Router ! boot-start-marker boot-end-marker ! logging message-counter syslog enable secret 5 . ! no aaa new-model ! ! dot11 syslog ip source-route ! ! ! ip dhcp pool Data network 192.168.240.0 255.255.255.0 domain-name Datadhcp.com dns-server 22.214.171.124 126.96.36.199 default-router 192.168.240.1 ! ip dhcp pool Voice network 192.168.140.0 255.255.255.0 default-router 192.168.140.1 dns-server 188.8.131.52 184.108.40.206 domain-name Voicedhcp.com ! ! ip cef ip domain name sistech.com no ipv6 cef ! multilink bundle-name authenticated ! ! !
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...