Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

NOT GETTING IP FROM DHCP SERVER

hello,

i setup a dhcp pool in my distribution switch which is directly connected to my access.

distribution ip to access is :int gi1/0/1 :192.168.250.1

accesss ip to distribution is int gi 1/0/1 : 192.168.250.2

they can ping each other. but the pc cannot get ip from the distribution switch. what might be the problem of this?

my distribution switch configuration for dhcp pool is:

.

ip dhcp pool vlan 247

network 10.60.247.0 255.255.255.0

default router 10.60.247.2

my access switch config is

int vlan 247

ip add 10.60.247.4 255.255.255.0

ip helper address 192.168.250.1

thank you and best regards...

1 REPLY

Re: NOT GETTING IP FROM DHCP SERVER

hello,

i setup a dhcp pool in my distribution switch which is directly connected to my access.

distribution ip to access is :int gi1/0/1 :192.168.250.1

accesss ip to distribution is int gi 1/0/1 : 192.168.250.2

they can ping each other. but the pc cannot get ip from the distribution switch. what might be the problem of this?

my distribution switch configuration for dhcp pool is:

.

ip dhcp pool vlan 247

network 10.60.247.0 255.255.255.0

default router 10.60.247.2

my access switch config is

int vlan 247

ip add 10.60.247.4 255.255.255.0

ip helper address 192.168.250.1

thank you and best regards..

Hi,

What is the model of the switch and vlan247 host are able to ping the 192.168.250.1 and check out the below link for configuring DHCP in routers and switches.

http://articles.techrepublic.com.com/5100-10878_11-5690240.html

Hope to Help !!

Ganesh.H

If helpful do rate the post

265
Views
0
Helpful
1
Replies
CreatePlease to create content