Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

novell ip multicast over ipsec vpn

I have followed the cisco advice to allow multicast traffic over the vpn. one command i cannot enter is "ip pim"

it isnt recognised by my 877 router.

the novell login client doesnt always see the tree or the contexts, i can see from a sniffer that the multicasts are being sent onto the LAN. but no reply.

any ideas would be appreciated

2 REPLIES

Re: novell ip multicast over ipsec vpn

Kenny,

If you could post a little more about your network that would be appreciated. IE your router config and a show ver. I'm not to familar with Novell but does it use multicast for it's login, that kind of seems strange?

Most of the time you would create a gre tunnel through a vpn in order to pass multicast traffic.

If you can't type in ip pim I would check your ios version make sure multicast is supported in the software release you have.

http://www.cisco.com/en/US/products/ps6350/products_configuration_guide_chapter09186a00805a4e91.html

Patrick

Re: novell ip multicast over ipsec vpn

Kenny,

If you could post a little more about your network that would be appreciated. IE your router config and a show ver. I'm not to familar with Novell but does it use multicast for it's login, that kind of seems strange?

Most of the time you would create a gre tunnel through a vpn in order to pass multicast traffic.

If you can't type in ip pim I would check your ios version make sure multicast is supported in the software release you have.

http://www.cisco.com/en/US/products/ps6350/products_configuration_guide_chapter09186a00805a4e91.html

Patrick

98
Views
0
Helpful
2
Replies
CreatePlease to create content