Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

NTP Problem!

I have a PIX 515E running version 6.2

We have two NTP servers running NetTime time server on Windows 2000 servers.

I have defined the NTP on PIX and there is connectivity between the W2K servers and PIX.

No time synchronization seems to be happening. This is my configuration. Notice "No reference clock":

fw01(config)# show ntp

ntp server XXX.XXX.159.180 source inside

ntp server XXX.XXX.130.50 source inside prefer

fw01(config)# show ntp status

Clock is unsynchronized, stratum 16, no reference clock

nominal freq is 99.9984 Hz, actual freq is 99.9984 Hz, precision is 2**6

reference time is 00000000.00000000 (06:28:16.000 UTC Thu Feb 7 2036)

clock offset is 0.0000 msec, root delay is 0.00 msec

root dispersion is 0.00 msec, peer dispersion is 0.00 msec

Any idea?

Thanx

1 REPLY
New Member

Re: NTP Problem!

i have a peer with a CISCO ROUTER and its work well

Change or fix your OS ( All MS services are full of BUGS)

108
Views
0
Helpful
1
Replies
CreatePlease login to create content