Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

One Way voice of IP phone over Cisco VPN client to PIX 506 tunnel

I have this cisco IP phone setup in my office, and client outside try to use this with cisco vpn client over the vpn tunnel to PIX. Outside client can never receive any packet from the PIX side, they can talk, but cannot hear anything.

does anyone has this experience before?

does it has to do with IPSEC transport mode and tunnel mode?

I check the returning packet which send to the client, it has some ICMP port unreachable message, it's seems like LAN PC cannot find where the VPN client is!

got stuck...............=(

any suggestion would be really appreciate it.

2 REPLIES
Bronze

Re: One Way voice of IP phone over Cisco VPN client to PIX 506 t

Hi there,

I am still not sure if I understood your problem. Can you descrive your setup with a topology and some ip addresses..

Thanks

Jazib

New Member

Re: One Way voice of IP phone over Cisco VPN client to PIX 506 t

Hi Jazib,

let me explain it this way,

(IP_phone_unit-------Cisco Call Manager------PIX506)-------Internet---------(Cisco_VPN_client with IP softphone)

the problem is the call has been created, but Cisco VPN Client can never hear any voice from the IP phone unit which sit behind the PIX and call manager.

If there is any other info that could help you help me, pls let me know, it seems like this is a really common issue.

213
Views
0
Helpful
2
Replies
CreatePlease login to create content