Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

PAT to the outside interface IP

Hello

Is it possible to set the global (PAT) to the same IP that is on my outside interface. I believe this is how the small SOHO devices work such as the Linksys. This would be very cool for us at home who only have one IP address. Tell me if you have done it. Thanks

Mscaggs

3 REPLIES
New Member

Re: PAT to the outside interface IP

Yes, it is possible with the following:

global (outside) 1 interface

Ramesh

New Member

Re: PAT to the outside interface IP

Is that the complete command or do I state "interface outside"

Thanks

New Member

Re: PAT to the outside interface IP

that is the complete "global" command you need. By saying "global (outside) 1 interface" you are telling it use the outside interface.

Then you need your nat command, something like this:

nat (inside) 1 192.168.0.0 255.255.0.0

keep in mind that you must be using PIX version 5.2 or higher I believe.

-mike

221
Views
0
Helpful
3
Replies