I currently have a PAT on a public ip it is currently translating all internal to external traffic.
I have been told that I can use this public ip to translate incoming traffic aswell for example I can make it translate incoming traffic on port 5000 to a machine on my internal network on another port.
I was under the impression this could not be done that I would have to setup another public ip with a NAT for that machine and then do a port redirect.
Even if 188.8.131.52 is a PATed external address, connection to this address on port 5000 from outside, will be sent to inside machine 10.1.1.1 port 23. Also, make sure that your access-list allows connections at port 5000 to 184.108.40.206 from outside.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...