06-12-2002 12:10 PM - edited 02-20-2020 10:05 PM
Hello,
I wanted to know when I upgrade the software on the PIX from 6.13 to 6.21 ,should I load the PDM software or is it that PDM software gets downloaded along with 6.21.
Also for the remote management of the PIX through VPN tunnel what are the things that has to be configured on the PIX .
Thanks.
06-12-2002 12:53 PM
You will need to download and install the PDM seperately.
I'm not familiar with VPN/Remote management settings, but the 2.0 version of PDM now has a tab for making some VPN settings.
TH
06-12-2002 12:56 PM
The PDM software and PIX image are to seperate downloads. They are loaded into 2 different areas of flash.
If you download 6.2 you will want to download PDM 2.0.
There is a Wizard in PDM 2.0 that should help you configure your VPN Tunnel.
Take a look at this link for help with managing PDM through a VPN tunnel:
Accessing the PDM from an Outside Interface Over a VPN Tunnel
http://www.cisco.com/warp/public/110/pdm_vpntun.html
Thanks,
Chris
06-12-2002 01:00 PM
Hello,
I am not able to see PDM 2.0 in the software center.
I don't know whether it is released or not .Can you please confirm
06-12-2002 03:45 PM
CISCO have removed PDM 2.0 from software center
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: