I can telnet the PIX (501), PDM version 3.0(1) is installed, http server is enabled, PDM is configured and the host is allowed, still I can't access the PDM. Web browser displays the message "the page can not be displayed"?
yes, I type https. Ican access one other PIX in our network. only difference is that we have a concentrator in between lan and PIX (which PDM is not accessible). I can telnet to it but the only problem is with PDM. what about 3020 concentrator, would it make any difference?
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...