PDM on outside interface using windows VPN Client

[sjuan]

We need to configure a PIX 515E to accept PDM sessions on the outside interface over the internet from a machine that will connect to the PIX using VPN windows 2003 client, this machine is connected to the internet using ADSL, so it do no have a fix IP address.

Any ideas on how to do this???

[steven.wilson]

if your machine has an internet connection that you know the IP address of you can allow that address to view the PIX on the outside interface without the use of the VPN Client. However if you specifically want to use the VPN Client first the PDM connection is viewed by the PIX as an inside connection. Therefore you should configure the PIX to accept the PDM connection from the range of addresses that you have listed as the pool for the VPN Clients.

Good luck

Steve