Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

PDM rule descriptions

On PIX 501's running 6.3.3 and 3.0 PDM I'm having problems with rule descriptions. If I add descriptions to my rules in PDM and then apply them, PDM moves the descriptions to other rules. I've had this problem on multiple 501's using different PC's to run PDM. Any ideas?

1 REPLY

Re: PDM rule descriptions

This is actually a known issue (CSCeb39653 - PDM: Inconsistent behaviour when editing ACL descriptions). The root cause is actually a PIX bug. My suggestion would be to go ahead and open a TAC case to request the latest 6.3(3) interim PIX build. The engineer should be able to post this image for you. Good luck and sorry for the problems.

Scott

92
Views
0
Helpful
1
Replies
CreatePlease to create content