Per-user access lists do not work with ISDN

[dknecht]

The TACACS+-related document

http://www.cisco.com/univercd/cc/td/doc/product/access/acs_soft/csacs4nt/csnt2/ap_tacac.htm

states that

"Per-user access lists do not currently work with ISDN interfaces."

Is this still true for current IOS and TACACS+ releases? Any circumventions?

Thanks, David

[r-simpson]

You need to run 11.3 or newer IOS for per-user access-lists.

[Erick Bergquist]

From my understanding, you need to use virtual-profiles and virtual-templates for per-user configurations. Maybe, the doc meant they don't work on the ISDN physical interface.

Check out:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios112/vprof.htm