I'm here again, I have a problem with the ping results I'm getting when I'm pinging from Inside host to DMZ host's private IP address, The ping reply is intermittent, sometimes the reply is from the DMZ server Public NAT IP and sometimes.
Any idea how this thing happen and what could be the workaround..
This URL contains a document about how the ASA (Adaptive Security Algorhitm) handles traffic within the PIX, and it states that ICMP is not handled by the ASA, where IP is. So, there's a big difference in IP and ICMP handling on the PIX.
Are you using ping just to test a new setup?
- if yes, don't do that again :-)
- if no, why you need ICMP?
In case you really need ICMP returning traffic from the dmz interface to the inside interface you have to configure this properly within your PIX.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...