Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

PIX 501 and H323 - Videoconferencing

I have a H323 terminal behind a PIX 501 with a static mapping to the terminal. I can access the web interface of the terminal from its outside IP, but I cannot make or receive a Video call.

I've enable "fixup protocol H323 1720" and I've even tried the same command opening up other ports needed for h323 (except opening everything from 1024 to 65K).

Any suggestions?

thank you

Patrick Carter

2 REPLIES
New Member

Re: PIX 501 and H323 - Videoconferencing

I don´t know if you are using conduit or access-lists configuration, but what

you need to do is the next:

static (inside,outside) uniqueaddress yourlanaddresswhererunapplication netmask 255.255.255.255 0 0

conduit permit tcp host uniqueaddress eq h323 any

or, if using access-lists:

access-list acl_out permit tcp any host uniqueaddress eq h323

and

access-list acl_in permit tcp any any eq 443

New Member

Re: PIX 501 and H323 - Videoconferencing

no luck yet. Thank you for the help. Any other suggestions? I tried noth static and conduits and access-lists.

thx

209
Views
0
Helpful
2
Replies
CreatePlease login to create content