cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
900
Views
5
Helpful
2
Replies

PIX 501 Flashing Lights

tvanderwerken
Level 1
Level 1

A friend of mine has a PIX501 and whenever he boots up, all the lights start to flash and never stop. What could be or is the issue? My first thought is an IOS issue.

Thanks!!

2 Replies 2

pcomeaux
Cisco Employee
Cisco Employee

I believe the lights are a diagnostic in nature, indicating a problem with the device.

Your friend should open a case with TAC and if TAC determines that it is indeed a hardware problem, TAC can assist your friend in replacing the device if it is covered by a Smartnet contract.

peter

Hi,

I had the same problem w/ my PIX-501. It worked fine for 6 months then it started to flash anytime a cable was plugged into it. The flashing was actually the PIX rebooting over and over again. TAC replaced it w/ a new one and this second one has been fine now for 7 months.

C-ya,

Mike

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card