I have a PIX 501 with an IPSec tunnel with a Linux host (openswan, net-to-net). The tunnel works fine, isakmp and ipsec sas are created and working. The problem is that I cannot start a connection from the Linux-side (outside interface on the pix) without first initiating a connection from the PIX side...
I disabled the NAT with those commands :
access-list nonat permit ip 0 0 0 0
nat (inside) 0 access-list nonat
nat (outside) 0 access-list nonat
I also tried this (IPs masked...), without result :
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...