06-03-2003 02:45 AM - edited 02-20-2020 10:46 PM
I am a cisco firewall beginer .
I have a problem with configuration of cisco 501.
I have 1 public IP and i want redirect ports in more internal IP with the NAT.
Is it possible?
How Can I do?
Please Help me!
I thank you in advance.
06-03-2003 02:52 AM
Hi,
you can use PAT for this case...
http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_61/config/bafwcfg.htm
this document will be helpful for your configuration..
Regards
Kiruba
06-03-2003 03:01 AM
Hi ,
USe the following commands for our configuration.Hope this may help
nameif ethernet0 outside security0
nameif ethernet1 inside security100
ip address outside
ip address inside
nat (inside) 1 0 0
global (outside) 1
route outside 0.0.0.0 0.0.0.0
-\Kiruba
06-03-2003 03:11 AM
Thanks for your help but i can't understand how it works,
can you give me an example of a working configuration?
My problem:
mail server internal IP x.x.x.25
ftp server internal IP x.x.x.26
external IP 189.25.x.x
How can I do?
Thank for reply me!
06-03-2003 03:28 AM
Hi,
I think it's not possible to do static map for 2 internal host to a single external IP address..You need 2 external Ip addresses ...
Regards
Kiruba
06-03-2003 04:10 AM
thanks for your help!
a possible solution is the router in internal LAN?
-->Router --> Cisco 501-> router ADSL-> outside
| |
y y
ftp mail
Is it possible?
thank you in advance.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: