Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

PIX 501 Setup

Hi

Des anyone have a standard setup for a PIX 501 with one externally routable IP Address on the outside, and an internal network interface of 192.168.10.150, to allow Microsft VPN clients to authenticate via L2TP or PPTP, and browse the internal network (192.168.0.0/16)

Thanks in advance.

1 REPLY
Gold

Re: PIX 501 Setup

Nik,

Here's a document on how to setup PPTP access via PIX:

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a0080143a5d.shtml

And here's a very good example document (PDF format) by Zandernetworks on how to setup L2TP access via PIX:

http://www.zandernetworks.co.uk/technotes/Tech%20Note%2004.pdf

Hope the above helps and if you need further help then let me know. If it does help please rate post as it may help others.

Thanks

Jay

98
Views
0
Helpful
1
Replies
CreatePlease login to create content