I know this, but configure net only merges with the current running configuration.
"The configure net command merges the current running configuration with a TFTP configuration stored at the IP address you specify and from the file you name. If you specify both the IP address and path name in the tftp-server command, you can specify:filename as simply a colon (:)."
A have to enter write mem in order to store it in startup-configuration.
I need to copy a configuration file directly to startup-configuration remotely, because i have to change a pix outside ip address and default gateway. I can't do this with running config as if i change either i will get disconnected.
The ISP will change the IP and DG for the line, so i need to store the new configuration in nvram and ask the user to reboot the pix after the ISP changed the line's parameters.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...