Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

pix 5016.3(5) access from outside

i have pix 501. i want to configure it to access form outside. i have tried ssh.

i have given the following commands only:

hostname voippix

domain-name pix.com

ca generate rsa key 1024

ca save all

ssh (outside ip) (outside mask) outside

password 1234

access-list 103 permit icmp any any

access-group 103 in interface outside

icmp permit (ouside ip) (outside mask) outside

even then i am not able to access(ssh) pix from outside.

can i configure telnet for outside access

can anybody help me.

3 REPLIES
Gold

Re: pix 5016.3(5) access from outside

the command "ssh (outside ip) (outside mask) outside", please verify the parameter (outside ip) should be the trusted ip from the internet.

e.g.

ssh 1.1.1.1 255.255.255.255 outside

with this command, host with ip 1.1.1.1 from the outside is the only host that can ssh to the pix outside interface.

further, telnet from outside interface is not feasible on pix.

also, just wondering if you get the login prompt or not for the ssh. if you get the prompt, then make sure the username is pix and the password is 1234.

New Member

Re: pix 5016.3(5) access from outside

the outside ip is trusted ip.

even then i am not getting login prompt for the ssh.

can you please help me.

regards

pradeep

Gold

Re: pix 5016.3(5) access from outside

were you trying from the pix outside interface?

is there any other device infront of the pix that may be blocking the ssh session?

further, apply "ssh 0 0 inside". then try to ssh from the pix inside subnet. with this, we can isolate whether pix is accepting ssh or not, and the ssh configuration.

90
Views
4
Helpful
3
Replies
CreatePlease to create content