12-24-2005 09:07 PM - edited 02-21-2020 12:36 AM
Hello,
I just start using pix 506, I did upgrade the IOS to 6.3, But I am not been able to run PDM on this pix.
I did install the latest PDM software, but not been able to communicate as PDM!!
Can anyone help me on this issue.
Thanks
12-25-2005 05:56 PM
Did you enble http and configure what Ip and interface the PDM should use? In privledge mode type this command for help on this "http ?"
12-27-2005 01:20 AM
Hi,
You have to do the following tasks to be able to access the PIX via the PDM.
1. Create a RSA public key. To do thís you have to configure the following.
1.1 Create a Domain name
domain-name xxxxxxx
1.2 Generate a RSA public key (example: 1024 bits key)
ca generate rsa key 1024
ca save all
1.3 Enable the HTTP server on the PIX
http enable
1.4 Enable HTTP access from the desired interface (example: inside network 10.0.0.0 255.255.255.0)
http 10.0.0.0 255.255.255.0 inside
This should make it work!
Don't forget to access is with https://
Best regards
Marcus
12-27-2005 02:28 AM
Thank you so much. it works...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: