Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

PIX 506

Hello,

I just start using pix 506, I did upgrade the IOS to 6.3, But I am not been able to run PDM on this pix.

I did install the latest PDM software, but not been able to communicate as PDM!!

Can anyone help me on this issue.

Thanks

3 REPLIES
New Member

Re: PIX 506

Did you enble http and configure what Ip and interface the PDM should use? In privledge mode type this command for help on this "http ?"

New Member

Re: PIX 506

Hi,

You have to do the following tasks to be able to access the PIX via the PDM.

1. Create a RSA public key. To do thís you have to configure the following.

1.1 Create a Domain name

domain-name xxxxxxx

1.2 Generate a RSA public key (example: 1024 bits key)

ca generate rsa key 1024

ca save all

1.3 Enable the HTTP server on the PIX

http enable

1.4 Enable HTTP access from the desired interface (example: inside network 10.0.0.0 255.255.255.0)

http 10.0.0.0 255.255.255.0 inside

This should make it work!

Don't forget to access is with https://

Best regards

Marcus

New Member

Re: PIX 506

Thank you so much. it works...

93
Views
0
Helpful
3
Replies
CreatePlease to create content