Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

PIX 506E hangs at boot

Cisco PIX 506E hangs during boot. This is as far as it gets:

CISCO SYSTEMS PIX FIREWALL

Embedded BIOS Version 4.3.207 01/02/02 16:12:22.73

Compiled by morlee

32 MB RAM

PCI Device Table.

Bus Dev Func VendID DevID Class Irq

00 00 00 8086 7192 Host Bridge

00 07 00 8086 7110 ISA Bridge

00 07 01 8086 7111 IDE Controller

00 07 02 8086 7112 Serial Bus 9

00 07 03 8086 7113 PCI Bridge

00 0D 00 8086 1209 Ethernet 11

00 0E 00 8086 1209 Ethernet 10

Any suggesstions?

1 REPLY

Re: PIX 506E hangs at boot

hi

Found a cavet CSCdv87789 PIX506E hangs when booting with 64 sector flash which i feel exactly falls inline with your problem.

The same has been fixed in the later OS versions,if you are running 6.1(x) would suggest to upgrade the same to later OS if possible to the recent version.

http://www.cisco.com/en/US/products/sw/secursw/ps2120/prod_release_note09186a008057b900.html

regds

136
Views
0
Helpful
1
Replies