Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

PIX 515 adding a second DMZ

Hi,

This is the spec of our PIX:

Cisco PIX Firewall Version 6.2(2)

Cisco PIX Device Manager Version 2.0(2)

Compiled on Fri 07-Jun-02 17:49 by morlee

FIREWALL up - days - hours

Hardware: PIX-515, 32 MB RAM, CPU Pentium 200 MHz

Flash i28F640J5 @ 0x300, 16MB

BIOS Flash AT29C257 @ 0xfffd8000, 32KB

0: ethernet0: address is 0003.6bf6.74a2, irq 11

1: ethernet1: address is 0003.6bf6.74a3, irq 10

2: ethernet2: address is 00a0.c944.395b, irq 9

Licensed Features:

Failover: Disabled

VPN-DES: Enabled

VPN-3DES: Enabled

Maximum Interfaces: 3

Cut-through Proxy: Enabled

Guards: Enabled

URL-filtering: Enabled

Inside Hosts: Unlimited

Throughput: Unlimited

IKE peers: Unlimited

Is it possible to add a second DMZ simply by adding another network card to the system? If not, what would I need to do to get a second DMZ?

Regards,

Alan

1 ACCEPTED SOLUTION

Accepted Solutions

Re: PIX 515 adding a second DMZ

You already have 3 interfaces, and your license only allows 3 (as you are running Restricted License). See line in your show ver above: Maximum Interfaces: 3

You need to upgrade your license to Unrestricted, then you can have up to 6 interfaces.

Hope it helps.

Steve

1 REPLY

Re: PIX 515 adding a second DMZ

You already have 3 interfaces, and your license only allows 3 (as you are running Restricted License). See line in your show ver above: Maximum Interfaces: 3

You need to upgrade your license to Unrestricted, then you can have up to 6 interfaces.

Hope it helps.

Steve

88
Views
0
Helpful
1
Replies
CreatePlease login to create content