I have a PIX 515 using 6.2. I have it connected to a cable modem. The outside interface gets its IP address via dhcp from my cable provider. The DHCP address has not changed in years. I would like to host an email and web server for outside access. I also need to have my internal users access internet services. I guess using pat. I have seen a similar question answered on this connection board, however, the PIX 501's outside interface had an assigned static address, where my Pix's outside interface is assigned via dhcp.
Sorry for not posting the question. Here it is. Does anyone have a sample config that would work here? I know some folks out there are also using the 506 and 501 for this purpose as well. Any help would be apprecated.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...