Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

PIX 515 and VPN access

We use a PIX 515 with firmware version 7. I use the ASDM to manage the PIX. We have an external company who usually connects to our company servers via the PIX's VPN feature. We have just changed our internal IP addressing scheme on our servers and they can no longer connect. They told me they get past phase 1 on the connection but it fails on phase 2. Now me being a novice; what do I need to do to get them to connect to our servers again? I assume the PIX is still "pushing" them towards the old IP address range?

Anyway your help is appreciated...


Re: PIX 515 and VPN access


If they are still able to login and recieve ip from PIX then you need to check out for the access required to be opened for the VPN Client to the new ip address which is configured in your servers.

Do check out for the old access list entries permitting the access and reconfigure the same accordingly...


New Member

Re: PIX 515 and VPN access

Can I ask where this would be on the Pix's ASDM? (Novice)

CreatePlease login to create content