pix 515 dmz access

[timeguardian]

helo

i have a problem and perhaps someone can help me

i have a pix 515E win 3 interfaces

2 servers are linked in the DMZ with 10.0.0.2 and 10.0.0.3

the 10.0.0.3 has 192.168.0.3 in the inside via static

how can i from 10.0.0.2 access the 192.168.0.3 server (not 10.0.0.3 !!!) ?

thanks

[Patrick Laidlaw]

Hello,

So to understand you clearly you have used a static so that people on the inside can hit 192.168.0.3 to get to the 10.0.0.3 server. You would like to find out if your 10.0.0.2 can user the 192.168.0.3 address to talk to the 10.0.0.3 server. Below is the way the traffic would flow to accomplish what your asking.

10.0.0.2 DMZ -> Inside 192.168.0.3 Inside -> DMZ 10.0.0.3

The answer is you will not be able to do this. PIX's do not allow you to travers from one interface and terminate traffic on a different interface.

Patrick

[timeguardian]

thanks for the prompt answer

is there any trick so i can rewrite the request ?? so that if anyone calls from the dmz the 192.168.0.3 server my pix rewrites the request in 10.0.0.3 ??? or how can i do that because i need to do that instead of modifying my network