Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

PIX-515 does not identify Tokenring Interfacecard

Hello,

I have installed a PIX-1TR interface in PIX-515.Boot ok, configuration 'answer' NO. sh vers and sho int etc. shows only the build in Ethernet0 and Eth1, but not tokenring interface.

sh version output looks as follow.

Thanks Ruedi

pixfirewall# sh ver

Cisco PIX Firewall Version 6.2(2)

Cisco PIX Device Manager Version 2.0(2)

Compiled on Fri 07-Jun-02 17:49 by morlee

pixfirewall up 10 mins 14 secs

Hardware: PIX-515, 32 MB RAM, CPU Pentium 200 MHz

Flash i28F640J5 @ 0x300, 16MB

BIOS Flash AT29C257 @ 0xfffd8000, 32KB

0: ethernet0: address is 0003.6bf6.a8a9, irq 11

1: ethernet1: address is 0003.6bf6.a8aa, irq 10

Licensed Features:

Failover: Disabled

VPN-DES: Enabled

VPN-3DES: Disabled

Maximum Interfaces: 3

Cut-through Proxy: Enabled

Guards: Enabled

URL-filtering: Enabled

Inside Hosts: Unlimited

Throughput: Unlimited

IKE peers: Unlimited

Serial Number: 405341167 (0x182903ef)

Running Activation Key: xxxxxxxxx

Configuration last modified by enable_15 at 13:11:47.490 UTC Tue Dec 23 2003

pixfirewall#

2 ACCEPTED SOLUTIONS

Accepted Solutions
New Member

Re: PIX-515 does not identify Tokenring Interfacecard

Hi,

TokenRing is no longer supported, I think since version 6.0.

Re: PIX-515 does not identify Tokenring Interfacecard

For documentation purposes:

http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_60/relnotes/pixrn601.htm#xtocid66

The previous poster was right on the money.

Scott

3 REPLIES
New Member

Re: PIX-515 does not identify Tokenring Interfacecard

Hi,

TokenRing is no longer supported, I think since version 6.0.

Re: PIX-515 does not identify Tokenring Interfacecard

For documentation purposes:

http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_60/relnotes/pixrn601.htm#xtocid66

The previous poster was right on the money.

Scott

New Member

Re: PIX-515 does not identify Tokenring Interfacecard

Hi Andre and Scott,

Thanks for informations.

Problem solved.

Ruedi

81
Views
0
Helpful
3
Replies
CreatePlease to create content