Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

PIX 515-E Logical+Physical interface support

How many interfaces in total supported 515E including logical(VLANs by 802.1q) and physical? on CCO it is 8 Logical and 6 Physical. Effectively I should get 13 Interfaces (1 Physical Interface needed for trunk), right? But it says maximum 10...is it true or mistakenly mentioned.

Thanx

2 REPLIES
Cisco Employee

Re: PIX 515-E Logical+Physical interface support

With a 515E and an Unrestricted license, you can have:

- maximum of 6 physical interfaces

- maximum of 8 logical interfaces

- overall maximum of 10 total interfaces

What this means is in total, the PIX can have a maximum of 10 interfaces configured, but NO MORE than 6 physical or 8 logical within that 10.

In short, you can't have both the maximumm number of physical and logical interfaces in the PIX at the same time. If you have 6 physical interfaces, then you can only have a maximum of 4 logical interfaces (equal to 10 in total). If you have 8 logical interfaces, then you can only have a maximum of 2 physical interfaces (equal to 10 in total)

New Member

Re: PIX 515-E Logical+Physical interface support

Thanks for the quick answer.:-)

94
Views
0
Helpful
2
Replies