Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

PIX 515 Mapped IP

I am running PIX 515, VER 5.3, I have the following mapped address:

static (inside,outside) 74.231.209.230 10.13.11.100 netmask 255.255.255.255 0 0

In this case I can access the Global IP 74.231.209.230 from out side, but I cannot access it from inside of the PIX, Y SO. How can I access this ip from the inside hosts.

3 REPLIES
New Member

Re: PIX 515 Mapped IP

Inside users have to use the inside (=real) ip address of the server.

New Member

Re: PIX 515 Mapped IP

Hi,

well this is a problem which every one faces is the pinging from the inside.

I have thought the only reason for this being the router on the outside when routing the packets outside thinks that the global IP which you are tryin to ping is witin the same interace,and hence does not ping r gives request timed out.

Also check,the link below.

http://www.cisco.com/warp/public/110/pixfaq.shtml

hope this helps !

bye .

tauseef

tauseef@cadgulf.com

Cisco Employee

Re: PIX 515 Mapped IP

You cant access global ip address from inside network, you need to use alias command which works with DNS, provided you DNS server is outside the PIX FW.

Remember you will only be able to access the host with the DNS name only, not through global IP address

120
Views
0
Helpful
3
Replies
CreatePlease login to create content