Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Pix 515 PAT using interface failed v6.3(3)

The problem I encounter is when I use the PAT through outside interface, my database segment unable to resolve name and surf internet.

When I change it using another public ip for PAT, then it works fine. I did check through bug tools kit, but nothing found.

Here are the setup. I had a pix with 6 interfaces. I'm using PAT on outside interface for high security segment to internet.

global (outside) 1 interface

nat (inside) 1 192.168.52.0 255.255.255.0

nat (database) 1 192.168.50.0 255.255.255.0

1 REPLY
Silver

Re: Pix 515 PAT using interface failed v6.3(3)

The Pix version that supports the outside interface as a pat address is 5.2 . Here is a link that has an example.

http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_v52/config/commands.htm#xtocid1604940

110
Views
0
Helpful
1
Replies