Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

PIX 515 Question about mail server behind inside

I have a question about putting mail server behind inside interface using static command. It seems like works fine. However, I get "incomplete" message when I looked at PDM config since I put access rule sourcing and destination on the same interface. Is there any other way to do this?

I am translating public address to inside address using static command.

Let me know if you need more info.

Thanks.

pk

3 REPLIES
Purple

Re: PIX 515 Question about mail server behind inside

Hi Peter,

A bit of you relevant config would help.

Paresh

New Member

Re: PIX 515 Question about mail server behind inside

This is the config I have for my mail server.

access-list outside_access_in extended permit tcp any host 65.10.127.4 eq www

access-list outside_access_in extended permit tcp any host 65.10.127.4 eq smtp

static (inside,outside) 65.10.127.4 10.10.10.5 netmask 255.255.255.255

thanks.

pk

New Member

Re: PIX 515 Question about mail server behind inside

This is the config I have for my mail server.

access-list outside_access_in extended permit tcp any host 65.10.127.4 eq www

access-list outside_access_in extended permit tcp any host 65.10.127.4 eq smtp

static (inside,outside) 65.10.127.4 10.10.10.5 netmask 255.255.255.255

thanks.

pk

110
Views
0
Helpful
3
Replies