Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

PIX 515 upgrade from 5.2.3 to 6.1.4 DMZ interface lost

I did an upgrade from PIX 5.2.3 to 6.1.4 and when rebooted ethernet2 interface was not recognised. Show Interface does not list the ethernet2 (DMZ)

interface.

I put back the 5.2.3 and show interface displays the ehternet2 interface and everything is fine.

What is the problem I am facing?

I tried 6.2.2 version as well and ethernet2 still does not get recognised.

The Ethernet2 interface is purchased from Cisco.

Thanks.

4 REPLIES
New Member

Re: PIX 515 upgrade from 5.2.3 to 6.1.4 DMZ interface lost

Do you see any error when you boot up? Something with regard to "ignoring PCI card"?

-Jonathan

New Member

Re: PIX 515 upgrade from 5.2.3 to 6.1.4 DMZ interface lost

No I did not see any ignoring PCI card message. Thanks

New Member

Re: PIX 515 upgrade from 5.2.3 to 6.1.4 DMZ interface lost

Sorry for the previous reply.

I did the upgrade again and still I have the ethernet2 (DMZ) interface missing.

I can see the message "Ignoring PCI card in slot:2

Thanks

Cisco Employee

Re: PIX 515 upgrade from 5.2.3 to 6.1.4 DMZ interface lost

There is field notice for this:

http://www.cisco.com/warp/public/770/fn15028.shtml

You need to open a TAC case.

hope this helps,

-Nairi

159
Views
0
Helpful
4
Replies
CreatePlease to create content